Cable Telecommunications
France
Spain
Morocco
Italy
Turkey
Greece

Shake N' Seal Cable Telecommunication Splice Protection Kits
Splice Protection Kits - Your Simple Solution
  • Protects Against Cable and Connector Corrosion
  • Cost Effective
  • Easy to Use
  • Permanent, 100% Water Tight
  • Reduced Plant Replacement Needs
  • Fix It and Forget It

Print Datasheet  

Distributors:

Cable Telecommunications products can be purchased at the following authorized distributor:

-TVC Communications, 888-644-6075, www.tvcinc.com.

 

 
Shake and Seal CT Series Installation Demo

Frequently Asked Questions (Please click to see a list of CT FAQ's)

DESCRIPTION
As bandwidth increases, the demand for reliable, corrosion-free connections is more critical than ever. With a snap of your fingers, protect your cable and connectors with Uraseal's series of splice protection kits specifically designed to maintain the integrity of your network in today's high speed environment. The kit comes complete with closure, encapsulate, gloves, emery cloth, and mixing paddle. 
BENEFITS
Adaptable & Easy to use
The self-sealing tapered ends on the flexible case provide a positive seal to various size cables without taping. The pouring slots and air vents allow air to escape, while the flexible closure will allow you to work out any entrapped air bubbles.
Safe
The encapsulating resin has controlled exotherm (heat building up through chemical reaction) that will not damage even the thinnest wall of polyethylene or polypropylene insulation.
Excellent Penetration
Low viscosity compound completely penetrates even large conductor bundles.
Assured Protection
The CT Series kit provides positive moisture protection, even in the toughest environments. The electrical and insulation properties are also excellent. 
Eliminate Replacing Cable
Why replace cut cable when you can install a permanent protected splice for 1/3 of the cost.

CONNECTOR SIZING CHART

(for more detailed connector cross reference, please click: connector chart)

  Connector
Closure
 Splice
Product
Number		 Maximum Outside Diameter* Inside Diameter (Inches) Overall Length (Inches) Max Splice Length (Inches)
CT1100 .625 1.00 10.00 6.00
CT1150 1.125 1.50 18.00 12.00
CT1200 1.625 2.00 18.00 12.00
CT1250 2.125

2.50

 20.00 12.00
URB6200AC Encapsulating Resin (only) - 174 grams

*PLEASE NOTE: The closure dimensions and the amount of encapsulating resin provided with each closure have been calculated based upon maximum connector sizes. If a smaller cable or connector is used with a larger closure, it is possible there may be insufficient resin to completely encapsulate the splice. If this occurs, "topping off" with additional encapsulating resin is recommended (see URB6200AC**).

**The URB6200AC is an encapsulating resin kit, which contains: one tube of resin, disposable gloves and mixing paddle. The kits can be purchased separately.

For a more detailed connector cross reference chart, please click: connector chart