
EXCELLENT FOR SPLICING THE FOLLOWING:
- For golf course water controls
- Around water treatment plants
- In RV parks, or outdoor lighting
- Around swimming pools
- For irrigation controls
The Shake N’ Seal kits are suitable for direct burial applications
or equivalent by providing a permanent water
tight seal that
protects your splice from moisture and voltage leaks to ground,
and helps to eliminate cable deterioration, and other related
problems that can lead to open circuits and cable failure. Perfect
for wet or damp areas!
The Shake N’ Seal kit replaces the
sheath integrity with an
absolute seal around the splice or damaged cable. Use these
new kits for adding a length of wire to a run, or building a
branch splice. Encapsulate 18 to 1 gauge multi-conductor
wire splices, and single service conductors up to 750 mcm -
up to 5kv.
The series of Shake N’ Seal kits are safe and easy to use.
No need for a torch or
open flame. This proven technology has
been used in similar sealing applications for over 30 years
without failure.
|
|


| |
Butt Splice
Configuration |
Through Splice
Configuration |
| |
ES137S |
ES200S |
ES200SV |
ES200SV |
ES1150 |
|
Wire Type |
No. of Conductors |
No. of Conductors |
|
18 - 16 |
10 |
20 |
14 |
14 |
|
|
14 - 12 |
6 |
12 |
9 |
9 |
|
|
10 |
4 |
8 |
6 |
6 |
|
|
8 |
3 |
6 |
4 |
4 |
4 |
|
6 |
2 |
2 |
2 |
2 |
3 |
|
4 |
2 |
2 |
2 |
2 |
2 |
|
3 |
2 |
2 |
2 |
2 |
2 |
|
2 |
1 |
2 |
2 |
2 |
2 |
|
1 |
1 |
2 |
2 |
2 |
2 |
|
1/0 |
|
|
|
|
2 |
|
2/0 |
|
|
|
|
2 |
|
3/0 |
|
|
|
|
2 |
|
4/0 |
|
|
|
|
2 |
|
250 mcm |
|
|
|
|
2 |
Selector Chart |